Garmin G1000 Mooney M20TN - Manual (Page 454)

190-00647-01 Rev. B Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
443
APPENDIX A
DATABASE MESSAGE ADVISORIES (CONT.)
Message Comments
MFD1 DB ERR – MFD1 FliteCharts
database error exists. The MFD and/or PFDs detected a failure in the FliteCharts database (optional feature).
Ensure that the data card is properly inserted. Replace data card. If problem persists,
The G1000 system should be serviced.
DB MISMATCH – Aviation database
version mismatch. Xtalk is off. The PFDs and MFD have different aviation database versions installed. Crossfill is off.
Install correct aviation database version in all displays.
DB MISMATCH – Airport Terrain
database mismatch. The PFDs and MFD have different airport terrrain databases installed. Install correct
airport terrain database in all displays.
DB MISMATCH – Aviation database
type mismatch. Xtalk is off. The PFDs and MFD have different aviation database types installed (Americas,
European, etc.). Crossfill is off. Install correct aviation database type in all displays.
DB MISMATCH – Terrain database
version mismatch. The PFDs and MFD have different terrain database versions installed. Install correct
terrain database version in all displays.
DB MISMATCH – Terrain database
type mismatch. The PFDs and MFD have different terrain database types installed. Install correct
terrain database type in all displays.
DB MISMATCH – Obstacle database
version mismatch. The PFDs and MFD have different obstacle database versions installed. Install correct
obstacle database version in all displays.
GMA 1347 MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
GMA1 CONFIG – GMA1 config error.
Config service req’d. The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
MANIFEST – GMA1 software
mismatch, communication halted.
The audio panel has incorrect software installed. The G1000 system should be serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair. The audio panel self-test has detected a problem in the unit. Certain audio functions may
still be available, and the audio panel may still be usable. The G1000 system should be
serviced when possible.