Automatic flight control system – Garmin G1000 Mooney M20TN User Manual

Page 384

Advertising
background image

190-00647-01 Rev. B

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

373

AUTOMATIC FLIGHT CONTROL SYSTEM

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

NOTE:

Support for WAAS precision approaches is available only in installations with GIA 63W IAUs when

WAAS is available.

Flying a RNAV GPS approach with vertical guidance:

1)

Arm flight director modes for a RNAV GPS approach with vertical guidance:

a)

Make sure the navigation source is set to GPS (use CDI Softkey to change navigation source).

b)

Select the Runway 35R LPV approach for KCOS. Load and activate the approach into the flight plan.

2)

Press the APR Key once clearance for approach has been received. GPS Approach Mode is activated and
Glidepath Mode is armed.

3)

Once the glidepath is captured, Glidepath Mode becomes active. The flight director now provides guidance to
the missed approach point.

4)

There are two options available at this point, as the autopilot flies the approach:

• Push the AP DISC Switch at the Decision

height and land the aircraft.

• Use the GA Switch to execute a missed

approach.

4

GPS APR/

G

P

M

ode

FALUR

1

2

3

GPS NA

V Mode

KCOS

HABUK

PYNON

CEGIX

Figure 7-38 LPV Approach to KCOS

Advertising
This manual is related to the following products: