Hazard avoidance, Displaying traffic data – Garmin G1000 Mooney M20TN User Manual

Page 337

Advertising
background image

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

190-00647-01 Rev. B

326

HAZARD AVOIDANCE

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

Figure 6-71 Traffic Map Page

Operating

Mode

Altitude

Mode

Traffic Advisory,

Aircraft is

400’ Below,

Climbing

Off Scale

Traffic

“Non-Bearing”

Traffic (Bearing

Undetermined),

Distance 8.0 nm,

1100’ Above,

Descending

Proximity

Traffic, 1000’

Above,

Descending

Traffic Display

Range

The Traffic Map Page shows surrounding TAS traffic data in relation to the aircraft’s current position and

altitude, without basemap clutter. Aircraft orientation is always heading up unless there is no valid heading.
Map range is adjustable with the RANGE Knob from 2 to 24 nm, as indicated by the map range rings.

The traffic mode and altitude display mode are annunciated in the upper left corner.

DISPLAYING TRAFFIC DATA

Traffic information can be displayed on the following maps when the SKY497 unit is operating:

• PFD Inset Map

• Navigation Map Page

• Traffic Map Page

• Trip Planning Page

• Nearest Pages

• Active Flight Plan Page

Displaying traffic information (maps other than the Traffic Map Page):

1)

Press the MAP Softkey (for the PFD Inset Map, press the INSET Softkey).

2)

Press the TRAFFIC Softkey. Traffic is now displayed on the map.

When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate TAS is

enabled for display.

Advertising
This manual is related to the following products: