System status, Hazard avoidance – Garmin G1000 Mooney M20TN User Manual

Page 332

Advertising
background image

190-00647-01 Rev. B

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

321

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Muting the “Traffic Not Available” voice alert:

1)

Select the Traffic Map Page.

2)

Press the TNA MUTE Softkey. The status is displayed in the upper left corner of the Traffic Map Page.

Or

:

a)

Press the MENU Key.

b)

Select ‘‘’Not Available” Mute On’ (shown if TNA muting is currently off) and press the ENT Key.

SYSTEM STATUS

The G1000 performs an automatic test of TIS during power-up. If TIS passes the test, TIS enters Standby

Mode (on the ground) or Operating Mode (in the air). If TIS fails the power up test, an annunciation is shown
in the center of the Traffic Map Page.

Traffic Map Page

Annunciation

Description

NO DATA

Data is not being received from the transponder*

DATA FAILED

Data is being received from the transponder, but
a failure is detected in the data stream*

FAILED

The transponder has failed*

UNAVAILABLE

TIS is unavailable or out of range

* Contact a service center or Garmin dealer for corrective action

Table 6-11 TIS Failure Annunciations

Figure 6-70 TIS Power-up Test Failure

Data Not

Received from

Transponder

System Test has

Failed

Advertising
This manual is related to the following products: