Garmin G1000 Mooney M20TN - Manual (Page 345)

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 190-00647-01 Rev. B 334
AUTOMATIC FLIGHT CONTROL SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
7.1 AFCS CONTROLS
The following dedicated AFCS keys are located on the bezel of the MFD:
1 AP Key Engages/disengages the autopilot
2 FD Key Activates/deactivates the flight director only
Pressing once turns on the flight director in the default pitch and roll modes. Pressing
again deactivates the flight director and removes the Command Bars. If the autopilot
is engaged, the key is disabled.
3 NAV Key Selects/deselects Navigation Mode
4 ALT Key Selects/deselects Altitude Hold Mode
5 VS Key Selects/deselects Vertical Speed Mode
6 FLC Key Selects/deselects Flight Level Change Mode
7 HDG Key Selects/deselects Heading Select Mode
8 APR Key Selects/deselects Approach Mode
9 VNV Key Selects/deselects Vertical Path Tracking Mode for Vertical Navigation flight control
10 NOSE UP/NOSE
DN Keys
Control the mode reference in Pitch Hold, Vertical Speed, and Flight Level Change
modes
Figure 7-1 Dedicated MFD AFCS Controls (GDU 1044)
1
2
3
4
5
6
7
8
10
9
NOTE: The GDU 1042 Bezel is the same with the exception of the VNV Key.