Bosch GOF 2000 CE Professional - Manual (Page 15)

English | 15
Bosch Power Tools 2 610 013 439 | (28.11.11)
16 Release lever
17 Thumbwheel for speed preselection
18 Lock-on button for On/Off switch
19 On/Off switch
20 Lock for release lever
21 Open-end spanner, size 24 mm*
22 Router bit*
23 Extraction hose (Ø 35 mm)*
24 Extraction adapter*
25 Wing bolt for extraction adapter (2x)*
26 Parallel guide*
27 Guide rod for parallel guide (2x)*
28 Wing bolt for fine adjustment of parallel guide (2x)*
29 Wing bolt for coarse adjustment of
parallel guide (2x)*
30 Fine-adjustment knob for parallel guide*
31 Adjustable edge guide for parallel guide *
32 Extraction adapter for parallel guide*
33 Router compass/guide-rail adapter*
34 Router compass handle*
35 Wing bolt for coarse adjustment of
router compass (2x)*
36 Wing bolt for fine adjustment of
router compass (1x)*
37 Fine-adjustment knob for router compass*
38 Centring screw for compass stop *
39 Base spacer (included in the “router compass” set)*
40 Guide rail*
41 SDS guide-bushing adapter
42 Fastening screw for guide bushing adapter (2x)
43 Release lever for guide bushing adapter
44 Guide bushing*
45 Fastening screw for guide plate (4x)
46 Centring pin*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 89 dB(A); Sound power level
100 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
=5.0 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Plunge router GOF 2000 CE
Professional
Article number 3 601 F49 ...
Rated power input W 2000
No-load speed min -1 8000
– 21000
Speed preselection z
Constant electronic control z
Connection for dust extraction z
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Tool holder mm
inch
8 – 12.7
¼– ½
Plunge depth mm 65
Weight according to
EPTA-Procedure 01/2003 kg 6.0
Protection class /II
Plunge router GOF 2000 CE
Professional
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
OBJ_BUCH-622-003.book Page 15 Monday, November 28, 2011 3:07 PM