Bosch GCO 2000 Professional - Manual (Page 16)

16 | English
1 609 92A 0CZ | (3.7.13) Bosch Power Tools
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for stationary use with cutting discs
to perform lengthways and crossways straight cuts or mitre
cuts to 45° in metal materials without the use of water.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Handle
4 Retracting blade guard
5 Spindle lock
6 Cutting disc
7 Angle stop
8 Clamping spindle
9 Quick-release button
10 Spindle handle
11 Mounting holes
12 Base plate
13 Locking screw for angle stop
14 Ring spanner (15 mm; 13 mm)
15 Transport safety-lock
16 Depth stop
17 Tool arm
18 Transport handle
19 Blade guard
20 Spark guard
21 Tool spindle
22 Clamping flange
23 Washer
24 Hexagon bolt
25 Lock nut of the depth stop
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise/Vibration Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
108 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 61029:
a
h
=3.0 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different appli-
cations, with different accessories or poorly maintained, the vi-
bration emission may differ. This may significantly increase the
exposure level over the total working period.
Symbol Meaning
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming into contact
with the cutting disc.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Wear safety goggles.
 Wear a dust respirator.
 Wear protective gloves.
OBJ_BUCH-1063-003.book Page 16 Wednesday, July 3, 2013 1:51 PM