Bosch PPS 7S - Manual (Page 38)

38 | English
1 609 929 W71 | (30.3.11) Bosch Power Tools
f Do not replace the installed laser with an-
other laser type. A laser that does not fit to
this power tool could pose dangers for other
persons.
f Never leave the machine before it has come
to a complete stop. Cutting tools that are
still running can cause injuries.
f Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol Meaning
f Laser radiation
Do not view directly with optical instruments
Class 1M laser product
f Keep hands away from the cutting area while the machine is running. Danger
of injury when coming in contact with the saw blade.
f Never stand on the power tool. Serious injuries can occur when the power tool
tips over or when inadvertently coming into contact with the saw blade.
f Wear a dust respirator.
f Wear ear protectors. Exposure to noise can cause hearing loss.
OBJ_BUCH-1259-002.book Page 38 Wednesday, March 30, 2011 11:02 AM