Dell OptiPlex GX240 - Manual (Page 103)

E x p a n s i o n - C a r d C a g e ( S m a l l D e s k t o p C o m p u t e r O n l y ) 103
E x p a n s i o n - C a r d C a g e R e p l a c e m e n t
3 Replace and reconnect any cables you removed in steps 1 and 2 of the
previous procedure.
Removing the PCI Riser Board
NOTICE: To avoid damage to the expansion cards or the system board by
ESD, ground yourself by touching an unpainted metal surface on the back of
the computer.
CAUTION: Use a wrist grounding strap as explained in
" Precautionary Measures ."
1 Remove the expansion-card cage .
2 Remove the expansion cards installed in the slots.
3 Remove the two screws that attach the riser board to the expansion-
card cage.
Replacing the PCI Riser Board
Follow the " Removing the PCI Riser Board " procedures in reverse order.