Removing the system board – Dell OptiPlex GX240 User Manual
Page 141
S y s t e m B o a r d
141
S y s t e m - B o a r d J u m p e r S e t t i n g s
Removing the System Board
CAUTION:
Before you remove any component from the system
board, read the steps in "
."
NOTE:
The system board
and metal tray are
attached and are removed
as one piece.
1
Remove any components that restrict access to the system board.
2
Disconnect all cables from the system board.
3
Before you remove the existing system board, visually compare the
replacement system board to the existing system board to make sure
that you have the correct part.
4
Pull up on the tab and slide the system board toward the front of the
computer; lift it up and away.
Jumper
Setting
Description
PSWD
(default) Password features are enabled.
Password features are disabled.
RTCRST
Real-time clock reset. Can be used for
troubleshooting purposes.
jumpered unjumpered