Dell OptiPlex GX240 - Manual (Page 50)

50 D r i v e s
www
.dell.com | support.dell.com
Removing the Floppy Drive
Small Form-Factor Computer
1 Disconnect the floppy-drive cable from the system board.
2 Remove the power cable from the interposer board.
3 Disconnect the CD/DVD drive cable and the power cable from the
CD/DVD drive.
4 Remove or raise the drive by pressing the green tabs on either side of
the drive and lifting the drive up.
5 Remove the floppy-drive cable from the floppy drive.
a Remove the interposer board from the floppy drive by pressing the
tab and rotating the interposer board.
R e m o v i n g t h e I n t e r p o s e r B o a r d — S m a l l Fo r m - Fa c t o r
C o m p u t e r
1 Floppy-drive cable
2 Tab
3 Interposer board
4 System board floppy-drive connector (DSKT)
1
3
4
2
or
1
3
4
2