Replacing the cooling fan/heat-sink assembly and, Microprocessor – Dell OptiPlex GX240 User Manual
Page 126
Advertising
126
M i c r o p r o c e s s o r
www
.dell.com | support.dell.com
10
Remove the microprocessor from the socket.
11
Leave the release lever extended so that the socket is ready for the new
microprocessor.
Replacing the Cooling Fan/Heat-Sink
Assembly and Microprocessor
CAUTION:
Use a wrist grounding strap as explained in
"
."
NOTICE:
Be careful not to bend any of the pins when you unpack the
microprocessor. Bending the pins can permanently damage the microprocessor.
1
Unpack the new microprocessor.
2
Align pin-1 (the beveled corner) of the microprocessor with the pin-1
corner of the socket.
NOTE:
You must identify the pin-1 corner to correctly position the
microprocessor.
Advertising