Dell OptiPlex GX240 - Manual (Page 90)

90 E x p a n s i o n C a r d
www
.dell.com | support.dell.com
2 Press the hinged lever on the expansion card retention arm and raise
the retention arm.
3 Grasp the card by its outside corners and ease it out of its connector on
the riser board.
4 If you are removing the card permanently, install a metal filler bracket
over the empty card-slot opening.
E x p a n s i o n C a r d R e m o v a l
Small Desktop Computer
1 Remove the expansion-card cage.
2 If necessary, disconnect any cables connected to the card.
1 Card-edge connector
2 Expansion card
3 Hinged lever
4 Retention arm
5 Expansion-card connector
1
2
3
4
5