Replacing the chassis intrusion switch – Dell OptiPlex GX240 User Manual
Page 38
Advertising
38
C h a s s i s I n t r u s i o n S w i t c h
www
.dell.com | support.dell.com
S m a l l M i n i -To w e r C o m p u t e r
1
Disconnect the chassis intrusion switch cable connector from the
control panel on the front of the chassis.
Note the routing of the chassis intrusion cable as you remove it from
the chassis. Chassis hooks may hold the cable in place inside the
chassis.
2
Slide the chassis intrusion switch out of its slot and remove the switch
and its attached cable from the chassis.
Replacing the Chassis Intrusion Switch
To replace the chassis intrusion switch, follow the "
" procedures in reverse order.
Advertising