Resetting the chassis intrusion detector – Dell OptiPlex GX240 User Manual
Page 39
Advertising
C h a s s i s I n t r u s i o n S w i t c h
39
Resetting the Chassis Intrusion
Detector
1
Enter system setup by pressing <F2> during the computer's POST.
NOTE:
For instructions on using system setup, see the User's Guide.
2
Under the System Security tab, reset the Chassis Intrusion option by
pressing the left- or right-arrow key to select Reset. Change the setting
to Enabled, Enabled-Silent, or Disabled.
NOTE:
The default is
Enabled-Silent.
NOTE:
If a setup
password has been
assigned by someone else,
contact the network
administrator for
information on resetting
the chassis intrusion
detector.
3
Press <Alt><B> to restart the computer and implement your
changes.
Advertising