Dell OptiPlex GX240 - Manual (Page 72)

72 D r i v e s
www
.dell.com | support.dell.com
If your computer came with an IDE CD drive, use the spare connector
on the existing interface cable. Otherwise, use the IDE interface cable
provided in the drive kit.
3 If you are installing a drive that has its own controller card, install the
controller card in an expansion slot.
4 Check all cable connections, and fold cables out of the way to provide
airflow for the fan and cooling vents.
5 If the drive bay was previously empty, remove the front-panel insert
from the front panel.
a Release the insert tabs from inside the chassis.
b Remove the insert by pressing it until it pops free.
c Replace the front-panel piece by snapping it into place.
Removing the Hard Drive
Small Form-Factor Computer
1 Disconnect the power cable and hard-drive cable from the drive.
1 Power cable
2 Audio cable
3 Data cable
4 Drive connector