American Magnetics 420 Power Supply Programmer - Manual (Page 100)

82 Rev. 7
Remote Interface Reference
SETUP Configuration Commands and Queries
4.5.3 SETUP Configuration Commands and Queries
The SETUP Configuration Commands and Queries provide read/write
access to the setup functions available within the Supply (see page 40),
Load (see page 44), and Misc (see page 48) setup submenus.
‡
SUPPly:TYPE?
Returns the index according to the table below for the selected power
supply type according to the table below. This value can only be configured
via front panel operation of the SUPPLY setup menu.
‡
SUPPly:VOLTage:MINimum?
Returns the minimum power supply compliance setting in volts. This value
can only be configured via front panel operation of the SUPPLY setup
menu and is set automatically when a preset supply type is selected.
‡
SUPPly:VOLTage:MAXimum?
Returns the maximum power supply compliance in volts. This value can
only be configured via front panel operation of the SUPPLY setup menu
and is set automatically when a preset supply type is selected.
‡
SUPPly:CURRent:MINimum?
Returns the minimum output current capacity of the power supply in
amperes. This value can only be configured via front panel operation of the
SUPPLY setup menu and is set automatically when a preset supply type is
selected.
Table 4-3. Return values and their meanings for the SUPPly:TYPE? query.
Return
Value Meaning
0 AMI 12100PS
1 AMI 12200PS
2 AMI 4Q05100PS
3 AMI 10100PS
4 AMI 10200PS
5 HP 6260B
6 Kepco BOP 20-5M
7 Kepco BOP 20-10M
8 Xantrex XFR 7.5-140
9 Custom