American Magnetics 420 Power Supply Programmer - Manual (Page 66)

48 Rev. 7
Operation
Setup Menu : Misc
3.2.3 Misc Setup Submenu
The Misc submenu allows specification of the display contrast setting, the
ramp rate time units, and the field units.
3.2.3.1 Display Contrast
Adjusts the contrast of the liquid crystal display from 0 to 100%.
The default setting is 80%. Enter a value or use the dial to adjust
the value.
3.2.3.2 Ramp Rate Time Units
Specifies whether ramp rate is specified and displayed in time units
of seconds or minutes. Use the
237,21 key to cycle between
selections. The selected option also applies to the appropriate
remote interface commands. The default setting is seconds.
3.2.3.3 Field Units
Specifies whether the field is specified and displayed in units of
kilogauss (kG) or Tesla (T). Use the
237,21 key to cycle between
selections. The selected option also applies to the appropriate
remote interface commands. The default setting is kilogauss.
 $ × 'LVSOD\ &RQWUDVW
 9V 
 $ × 6SHFLI\ 5DPS 5DWH ,Q"
 9V 6HFRQGV 0LQXWHV
 $ × )LHOG 8QLWV
 9V .LORJDXVV 7HVOD