American Magnetics 420 Power Supply Programmer - Manual (Page 84)

66 Rev. 7
Remote Interface Reference
SCPI Command Summary
(see page 80 for more information)
*STB?
*SRE < enable_value >
*SRE?
*CLS
*ESR?
*ESE < enable_value >
*ESE?
*PSC {0|1}
*PSC?
*OPC
*OPC?
(see page 82 for more information)
CONFigure:STABility < percent >
CONFigure:COILconst < value (kG/A, T/A) >
CONFigure:CURRent:LIMit < current >
CONFigure:PSwitch {0|1}
CONFigure:PSwitch:CURRent < current >
CONFigure:PSwitch:TIME < time >
CONFigure:QUench:DETect {0|1}
CONFigure:ABsorber {0|1}
CONFigure:RAMP:RATE:UNITS {0|1}
CONFigure:FIELD:UNITS {0|1}
Status System Commands
SETUP Configuration Commands