AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 23)

17
Function overview
Softkey line and idle display
The three keys below the display are called softkeys. The functions assigned to these keys are shown
in the bottom display line. The key function changes automatically according to the operating state
of the handset.
When the handset is delivered the following symbols are shown in the softkey line:
Enables selection from the redial list.
Navigation menu. This is used to call up a selection list with frequently used features.
These include:
π Phone book on the system* or handset
† Handset phone book (personal phone book)
√ Information lists (call list, voice box*, redial) or the programmed function
® Profiles or the programmed function
These functions are also assigned to the navigation keys.
* if available
You can use them to reach the phone menu (see page 48).
Note
Please note that the functions of the left and middle softkeys and of the left/right navigation keys
are programmable and therefore may subsequently be assigned with different functions.