AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 79)

73
Key programming
Loud environment
Adapt the speech quality in a loud environment.
Silent charging
Switch the "Silent charging" on or off.
LED incoming call
Switch the LED display for an incoming call on or off.
"Feature access codes" menu
This menu is system specific and will only be offered when the functions are supported by your sys-
tem. It allows the input of certain strings e.g. to park a line or to leave a call back request. Please con-
tact your system administrator for more information on the functions.
Additional menus for special applications
When using the communication system in certain areas, it can be practical to control the various
functions directly from your handset via server / XML interfaces.
Additional menu items are as follows (when available):
The
Applications menu, Server menu , Service-Codes and the Presence function.
The transmission and receipt of
Text messages and the Locating function are also applications that
have to be activated and licensed.
As the applications may be very different, they are usually explained in a separate User's Guide. Con-
tact your system administrator for more information on the functions.
Key programming
Your handset provides the possibility of assigning frequently used functions to specific keys.
Aastra 610d, 612d
You have the possibility of programming the left and middle softkey below the display and the left
and right navigation keys. The programmed left and right navigation keys can also be used in the
handset’s call connection state (providing their programming differs from the factory setting with
the setting Info and Profile).
Aastra 620d/622d/630d/632d/650c
You have the possibility of programming the left and middle softkey below the display. These pro-
grammed keys can only be used in the idle state.