AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 78)

72
"Profiles" menu
When the handset is delivered it has four profiles with characteristic settings pre-programmed for
the "intended purpose". A fifth profile is available for further settings. You can change all profiles
and rename them if required. The activated profile is displayed behind the
symbol on the idle
display.
Select
No profile No profile can be used with this setting. The settings you select apply.
Normal Parameters for "normal" use are configured in this profile.
Headset Parameters for using a headset are preset in this profile.
Meeting Parameters for using the handset during a meeting are preset in this profile.
Loud Parameters for use in a particularly loud environment are preset in this profile.
<Profile 05>
This profile is available for your own use.
Settings Choose one of the profiles to make changes.
Profile name
Change the name of the profile if required.
Ringer volume
Set your preferred ringer volume (increasing, 1...7).
Ringer device
Configure where or how the ringer should be signalled (loudspeaker, headset,
vibration alarm).
Play once Select whether the ringer should ring once or repeatedly.
Key click Switch the key click on or off.
Confirm tones
Switch the confirmation tones on or off.
Noise detection
Switch the automatic noise detection for a louder ringer on or off.
Devices menu