AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 46)

40
Making internal / external calls
If you see the message
No record! when dialling a phone number, your phone may be blocked by
the system. If so, please notify your System Administrator.
Briefly press the Call key
and / or
t
key in the internal or external phone number preceded by the code to seize external
lines.
Press the Call key.
… or
Press ❯❯❯ and select a phone number from the following lists
• Caller list
• Redial list
• Personal directory, Central directory
Only on Aastra 622d, 632d, 650c with set icon menu structure
(For menu structure, see page 64)
If you enter the start of a number and press the softkey
, then the handset searches
the personal directory for all names and numbers that start with this number sequence.
Select the required entry and press
Ok.
Note
Correcting your input during predial
• To delete individual digits, briefly press the
C key;
• To delete the entire phone number, press and hold down the C -key.
Toggling between digit and letter input (where supported by the system)
Press the *-key several times.
• Digit input: display reads
123
• Letter input – upper case, then lower case: display reads Aa
• Letter input – upper case: display reads A
• Letter input – lower case: display reads a
Setting the character set
During character input you can change the character set by pressing ❯❯❯. The selected setting is
then adopted as the default (inputs begin with either digits or letters). This setting can be reset tem-
porarily during the input by pressing the *-key once again.
Telephoning