AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 66)

60
Devices menu
Note
You can also program a key for switching between Standard and Hi-Q audio. The key setting has
priority over the menu setting.
“Data management / SD Card” menu
Aastra 622d, 632d, 650c only: This menu is only available when your handset is equipped with an
optional Aastra microSD card (see page 10). Other data can be stored on the card in addition to the
device settings. For more information on the card functions, please refer to the Aastra 600c/d docu-
mentation on the Aastra homepage.
"Call filter" menu
The call filter allows you to answer or block incoming calls. The Accept list setting only allows the
call numbers in the call number list to be signalled (no other numbers). The
Block list setting means
all calls are signalled except the calls from the call numbers in the list. If Unknown number is activa-
ted incoming calls without Caller-ID will also be blocked or signalled. The call number list can con-
tain 10 entries.
Status You can change the filter mode.
Accept list
Calls for the call numbers entered in the list are accepted.
Block list
Calls for the call numbers entered in the list are rejected.
Filter off Call filter is deactivated.
List of numbers
Shows the entries in the call number list. For a new entry select <New entry>.
Name Enter a name for the call number.
Number
Enter the call number. This entered caller number must correspond
exactly to the call number transferred by the network.
Unknown number
If switched on, also calls without transmitted caller number will be blocked or
signalled.
or …
Select a call number from the list.