AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 64)

58
SOS call Change of the currently set melody for incoming emergency calls.
Alarm clock
Changes the currently set melody for alarm clock signaling.
Appointment
Changes the currently set melody for appointment signaling.
Normal message
Changes the currently set melody for normal messages (when supported
by your system).
Urgent message
Changes the currently set melody for urgent messages (when supported
by your system).
Alarm message
Changes the currently set melody for alarm messages (when supported
by your system).
Note
You can listen to the melody with the softkey before saving. There is a choice of 44
polyphonic MIDI ringer melodies, 8 normal ringing tones (Basic), 7 alarm tone sequences
and 9 attention tones. At an incoming call, attention tones will be played only once. There
are 5 melodies (6700 … ) additional, which are similar to the ring tones of the devices of the
Aastra 6700 series.
Ringer settings
Play once
Select whether the call tone melody should be played once or repeated.
Silent charging
The handset does not give an acoustic signal for any calls when it is in the char-
ger cradle. When you take it out, calls are acoustically signalled again. The calls
are recorded in the call list.
“Silent Charging“ will not apply when the handset is charged via the USB con-
nector. This setting can also be done in the menu
Device options.
Ringer Switches all the ringer entries on the list on or off. This setting can also be done
in the menu
Volume settings.
Vibra call Select if the call signalling is also made via the vibration alarm (not Aastra 610d,
612d).
Corded headset
Select if the call signalling is also made on the headset.
Devices menu