AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 74)

68
Devices menu
a programmed emergency key or by the Alarm sensor (Aastra 630d, 632d /pro-
vided no Alarm number is programmed). This menu item is not displayed if the
SOS emergency number is predefined by the system.
SOS key
Lets you specify how the SOS key (Aastra 630d / 632d) should respond. The
emergency number is either dialled immediately (
SOS call: immmediately) or
only after you have pressed the key a second time ( SOS call: with confirma-
tion).
Alarm Sensor (Aastra 630d, 632d only)
Please read the Alarm Sensor descriptions on page 35ff before making the settings.
Alarm number
This menu item is not displayed if the SOS emergency number is predefined by
the system. Enter the alarm number to be called in the event of a sensor alarm.
You can precede the call number with the R key function (enquiry) by
pressing the #-key three times; the alarm call is then also possible
during a call (depending on the system and the handset).
Alarm auto answer
You can specify whether a call from any call number should be answered auto-
matically during the pre-alarm. Regardless of the setting, calls from the alarm
number or SOS emergency number are answered automatically and the pre-
alarm is terminated.
Pre alarm Use Change to switch the pre-alarm for all alarm types on or off.
Alarm tone The pre-alarm can be sounded with or without an alarm tone on
the handset. If the alarm tone is activated, the signalling volume
increases progressively.
Vibrator You can set whether the pre-alarm should also be signalled with
vibrator call.
Duration You can set the time (10s … 75s) that should elapse before the
emergency number is dialled. An increasingly loud ring tone (alarm
tone) is signalled on the handset during this time (provided it is
activated). The alarm can still be cancelled during the pre-alarm.
During the pre-alarm the alarm can still be cancelled with the follo-
wing measures:
•
With mandown alarm: By pressing Esc or holding the handset
vertical for at least 4 seconds.
• With the escape alarm: By pressing Esc.
• With the no movement alarm: By pressing Esc or shaking the
device sideways for 1 – 2 seconds.