AASTRA 600d for OpenCom 1000 User Guide (with bookmarks) EN - Manual (Page 37)

31
The headset that is found is shown by its name on the display. Confirm the display with Ok and enter
the PIN of the headset. The headset is now logged in and the
symbol appears on the top line of
the display.
You can specify the active headset in the Menu ❯❯❯ -> Settings -> Bluetooth -> Select headset.
Telephoning via the Bluetooth headset
Answering a call:
Press the "Connect key" on the headset or the green call key on the handset. The
symbol is dis-
played.
Ending a call:
Press the "End key" on the headset or the End key
on the handset.
Making a call:
Enter the call number on the handset and press the "Connect key" on the headset or the green call
key on the handset.
Hands-free operation:
If you press the hands-free key
to answer a call or during a call, Bluetooth operation is interrup-
ted and the handset's loudspeaker/microphone is activated.
Answering a call on the headset:
During a call on the handset: Press the Connect key on the headset.
Transferring a call on the handset:
During a call on the headset: Press ❯❯❯ and select Transfer BT to handset.
Special key (Hotkey) /VIP list
(Aastra 620d, 630d)
On delivery the special key (hotkey) at the top right of the 620d and 630d handsets is prepared as
VIP phone book/VIP list for saving up to six telephones to be available very quickly (the key can be
reprogrammed).
To program your favourite call numbers briefly press the hotkey followed by the New softkey. Enter
the name and the call number. You can specify further call numbers under the option ❯❯❯ -> New
Entry.
Basic functions