AASTRA 600d for OpenCom 1000 User Guide (with bookmarks) EN - Manual (Page 71)

65
Note
If the ringer is deactivated, there is also no acoustic signalling to indicate a set
alarm or appointment.
Signalling a set appointment
You can use Pause to interrupt the signalling for an expired appointment
reminder for 5 minutes. When you call up an appointment that has been put on
Pause (interrupted) you are offered Stop (to deactivate) and Pause (to main-
tain the interruption).
Alarm clock
Shows the list of alarms. Up to three alarm times can be entered and activated.
Status: On/Off
Change Here you can choose between Once (at the next specified time
with this value), Daily (repeats daily) and Off.
Time Show the time set for the alarm.
Change Changes the time setting.
Text Shows the text entered for the alarm.
Change Change/enter the text (max. 32 characters).
Note
If the ringer is deactivated, there is also no acoustic signalling to indicate a set
alarm or appointment.
Signalling a set Alarm-clock call
You can use Pause to interrupt the signalling for an expired alarm call for 5
minutes. When you call up an alarm-clock call that has been put on Pause
(interrupted) you are offered Stop (to deactivate) and Pause (to maintain the
interruption).
Timer
Lets you set a countdown timer (max. 23 hours / 59 minutes). The time remaining until the
signalling occurs (using increasingly loud beep tones) is indicated on the display. The
timer’s ringer cannot be adjusted.
Devices menu