AASTRA 600d for OpenCom 1000 User Guide (with bookmarks) EN User Manual

Page 90

Advertising
background image

84

Repeat alarm

This is the amount of time after which a new pre-alarm is made followed by the
dialling of the alarm call number, for instance because the dialling of the alarm
call number was cancelled (off, 5 s... 240 s).

Mandown Status: Indicates whether or not “mandown” is activated.

Press the Change softkey to activate or deactivate.
Delay: Allows you to set the amount of time the handset can remain outside
the vertical position before a pre-alarm is triggered (1 s … 60 s).

No movement alarm

Status: Indicates whether or not the no movement alarm is activated.
Press the Change softkey to activate or deactivate.
Delay: Allows you to set the amount of time the handset can remain still
without before a pre-alarm is triggered (10 s … 60 s).
Sensitivity: Allows you to set the sensitivity (low, medium, high). This allows
you to adapt the sensor to the different movements (e.g. ways of walking) of
the surveillance personnel. Switch off vibra call if you want to use the no move-
ment alarm.

Escape alarm

Status: Indicates whether or not the escape alarm is activated.
Press the Change softkey to activate or deactivate.
Delay: Allows you to set the amount of time the handset can be in rapid move-
ment before a pre-alarm is triggered (1 s … 60 s).
Sensitivity: Allows you to set the sensitivity (low, medium, high). This allows
you to adapt the sensor to the different movements (e.g. running movement)
of the surveillance personnel. Switch off vibra call if you want to use the escape
alarm.

Reset to default

You can reset different areas of your settings to the status they had on delivery.

Personal directory

You can delete your phone book entries after a confirmation prompt.

VIP list

Deletes the VIP list (see page 31).

All lists

All lists (call list, redial list, call list) are deleted after a confirmation prompt.

User settings

All the user settings (e.g. language, display settings) are reset to the factory set-
tings after a confirmation prompt.

Devices menu

Advertising