AASTRA 6739i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 16)

Operating Aastra 6739i SIP Telephone
14
Redial List
The redial list shows the call numbers last called. You can use this list to redial.
1. Press the redial key.
The Redial list menu card appears.
2. Use the navigation keys to go to the desired entry.
– To show detailed information on the entry selected, press the softkey.
– To call the selected call number, pick up the handset or press the softkey.
alternatively: Press the handsfree key, to make the following call in the
handsfree mode (see Handsfree / Open-Listening Mode starting on page 21).
The call number is dialled. The display shows a picture (photo) of the user called if
an image has been saved on the OpenCom 100 / Aastra 800 communications
system (please refer to page 50).
The following editing options (softkeys) are available in the redial list:
• Dial: The call number displayed is dialled.
• Delete: You delete the entry selected.
• Delete all: You delete all messages stored in your redial list (after a confirmation
prompt). Confirm the confirmation prompt using the Yes softkey.
Speed Dialling
The administrator of the OpenCom 100 / Aastra 800 communications system can con-
figure function keys for you with speed dialling destinations (Destination function
key, see Programming Function Keys starting on page 45).
• Pick up the handset and press the function key where the speed dialling desti-
nation is programmed.
alternatively – when you wish to call in the handsfree mode:
• Press the function key – with the handset down – where the speed dialling desti-
nation is programmed.