AASTRA 6739i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 22)

Operating Aastra 6739i SIP Telephone
20
2. Press the trunk key of the caller waiting to switch to that caller. The other caller is
now put on hold.
Tip: While you are talking with the first caller (the second caller is on
hold), you can initiate a conference with both callers. Press
the
Conf (Conference) softkey or the conference key. To
end the conference specifically, please read the description on
page 21.
3. Ending toggling: Press the goodbye key to terminate the current call.
4. Then press the trunk key where the other caller is waiting or press the Hold
softkey. You are now connected with the caller on hold once again.
Transferring Call to Another Caller
1. Press the Transfer softkey or the transfer key .
The person calling is put on hold and now hears music on hold.
2. Dial the call number of the internal caller desired.
– Transferring a call with notification: When the caller answers, announce the
call transfer. Press the
Transfer softkey or the transfer key .
– Transferring a call without notification: When you wish to wish to transfer the
call without notification, wait for the ringing tone. Press the
Transfer softkey
or the transfer key . The caller on hold now hears the ringing tone of the
transfer destination and waits for the call to be accepted.
Conference
You can speak with two callers simultaneously in a so-called “three-party conference”.
1. You are making a call.
2. Press the Conf (Conference) softkey or the conference key. Your caller is
put on hold.
3. Dial the call number of the conference caller desired.
4. When the second caller answers, announce the conference. Press the Conf
(Conference) softkey or the conference key.
You are now connected with both callers in a three-party conference. The display
shows the list of conference partners.