AASTRA 6739i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 19)

Operating Aastra 6739i SIP Telephone
17
3. You can also toggle back and forth between callers or initiate a conference with
both callers (please refer to page 19 also).
Tip: The Pickup from group function can also be carried out via the
main menu: 6 Connections > 1 Call pick-up > 1 Pick-up (see
page 38).
Note
“Pickup” is not possible if the person called belongs to a user group which has
pickup protection activated.
Ending a Call
To end a call you do as follows:
• Put down the handset.
or:
• press the goodbye key .
Call Lists
The administrator of the OpenCom 100 / Aastra 800 communications system can con-
figure Missed calls and Accepted calls function keys (please refer to Programming
Function Keys starting on page 45). Use these function keys to access the caller lists
managed on the OpenCom 100 / Aastra 800 communications system. The Missed
calls softkey blinks red when the list contains new entries.
1. Press the Missed calls or Answered calls function key to show the respective call
list. Press the
caller key to display the list of missed calls.
The caller list appears.
2. Use the navigation keys to go to the desired entry.
– To show detailed information on the entry selected, press the softkey.
– To call the selected caller entry, pick up the handset or press the softkey.
alternatively: Press the handsfree key, to make the following call in the
handsfree mode (see Handsfree / Open-Listening Mode starting on page 21).