AASTRA 6739i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 47)

Configuring the Aastra 6739i SIP Telephone
45
Configuring the Aastra 6739i SIP
Telephone
This chapter describes the configuration settings relevant for operating the
Aastra 6739i SIP telephone on the OpenCom 100 / Aastra 800 communications
system.
A description of all possible settings of the Aastra 6739i can be found in your
“Aastra 6739i SIP IP Phone User Guide” (please refer to page 6).
Programming Function Keys
The function keys are implemented as softkeys. By switching between up to five
levels, the assignment capacities of each softkey are multiplied on the Aastra 6739i
SIP telephone.
With the Web Configurator of the OpenCom 100 / Aastra 800 communications system
the administrator can configure and change the following function keys for your
Aastra 6739i SIP telephone.
Note
When the administrator has assigned you the corresponding user authorisation you
can also change these settings yourself in the menu Telephony: Devices:
System phones of the Configurator. Consult the Configurator online help for further
information.
Function key reference
Key type Parameter Function
none – none
Destination Call number,
Labelling
Direct dialling of a call number or code
procedure.
BLF Call number,
Labelling
Busy Lamp Field; softkey shows when
subscriber is busy.