AASTRA 620d for Aastra IntelliGate User Guide EN - Manual (Page 16)

Dialling and Phoning
16 Aastra 620d
eu
d-
1094
/1.
0 –
I7
.8
– 05
.2
009
■ Using a Headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is provided
on the headset.
Note:
If you loose the radio contact with a Bluetooth® headset, you can go back into the radio area without
being disconnected from the active connection.
Phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔
The call is provided on your headset.
Press the Loudspeaker key.
➔
The phone’s microphone is switched on and the headset microphone is
switched off.
Headset <--> Handset
You can use the Headset or Handset softkey to switch modes.
Ending a Call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the Chapter "To activate
headset operation" , page 56 .
• To find out how to connect a Bluetooth® headset, refer to Chapter "Activating
Bluetooth® mode and Bluetooth® devices" , page 57 .
• To call a user, dial the user’s phone number and press the Call key or Loud-
speaker key.
• For more information refer to your headset’s operating instructions.