AASTRA 620d for Aastra IntelliGate User Guide EN - Manual (Page 59)

Personalizing Your Phone
Aastra 620d 59
eu
d-
1094
/1.
0 –
I7
.8
– 05
.2
009
■ Changing the PIN
You want to change the PIN used to lock/unlock your phone (see Chapter "Locking your
phone" , page 49 and "Unlocking your phone" , page 50 ).
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for
your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the factory setting.
Note:
Your pin applies to all your phones.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
New user PIN
Scroll to New user PIN and press the Select softkey.
➔
The display reads User PIN .
<Old PIN>
Enter the old PIN and confirm with the Ok softkey.
➔
The display reads New user PIN .
<New PIN>
Enter the new PIN and confirm with the Ok softkey.
➔
The display reads Confirm user PIN .
<New PIN>
Enter the new PIN a second time and confirm with the Ok softkey.
➔
New PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with the *47 function code (see "User’s Guide */
# Procedures").