Battery, Inserting the battery, Charging the battery – AASTRA 620d for Aastra IntelliGate User Guide EN User Manual
Page 71: Ions in the, Installation and commissioning
![background image](/manuals/253589/71/background.png)
Installation and commissioning
Aastra 620d
71
eu
d-
1094
/1.
0 –
I7
.8
– 05
.2
009
Battery
Take also note of the safety information on handling the battery set out in Chapter
.
■ Inserting the battery
1. Push the battery cover downwards until it is released from the lock, then take it off.
2. Insert the battery with the contacts downwards.
3. Replace the battery cover and push it upwards until it locks.
■ Charging the battery
The batteries are supplied uncharged. To charge the batteries, place the phone in the charging
bay.
It is only after the battery has been charged for the first time that your phone is ready for use,
that calls can be answered and that you can make calls from the phone.
Notes:
• It takes several charging cycles before a new battery reaches full capacity.
• The technical data can be found in the Chapter
• The descriptions of the display symbols can be found in the Chapter
, page