Charging rack – AASTRA DT4x2 for BusinessPhone User Guide EN User Manual
Page 113
113
BusinessPhone – Cordless DT412/DT422/DT432
Installation
Charging rack
Note: See also separate Installation Guide, supplied
together with your Cordless.
The charging rack is used for charging your Cordless and/or spare
batteries. When charging spare batteries an adapter is needed. The
wall mounted charging rack and its power supply are a modular
system which enables a number of installation configurations.
Each power supply can support several charging racks with four
positions for Cordless phones and/or batteries in each rack (see
technical specifications for the charging rack).
As the Cordless cannot distinguish between a desktop charger and
the charging rack, it is recommended that the alert signal is
silenced when placed in a rack, see section “
on page 104. There is also a SIM parameter that can be set in the
SIM card programmer by your system administrator.