AASTRA DT4x2 for BusinessPhone User Guide EN - Manual (Page 49)

49 BusinessPhone – Cordless DT412/DT422/DT432
Call Forwarding
Program and activate a new External Diversion address
To set a new Individual External Diversion address: æ
Press.
*22*
Dial.
0 å
Dial the digit(s) for external call access and enter the new
External Diversion address.
A maximum of 24 digits.
Note: Which digit to press for external line access depends
on the configuration of the system.
If your public network requires waiting for a second dial
tone, press
*
. #
Press to activate the Individual Diversion.
Verification tone.
Note: Before you leave, call your extension to check if the
External Diversion has been set up correctly. This way you
can make sure that the number has been programmed
properly and that your calls will not be diverted to another
person by mistake. Individual External Diversion can also be
used via the DISA function, see section “ Other Useful
Features ” on page 75.
Cancel External Diversion æ #22#
Press and dial.
Note: The programmed Diversion address is not removed
from the memory, the Diversion is just inactive.