AASTRA DT4x2 for BusinessPhone User Guide EN - Manual (Page 98)

Settings
BusinessPhone – Cordless DT412/DT422/DT432 98
Program a Hot key or a Soft key with a function
When you have entered settings: á
Select Soft key or Hot key . â
or
ã
Select key.
For the Soft keys you can select keys Left, Middle or Right and for
the Hot keys you can select keys 0 to 9. á
Press.
Edit Press (see display).
Name:
is displayed. å
Save
Enter the name and press (see display).
Changes saved
is displayed. How to write text, see section “ Write
Text ” on page 83. ã
Press.
Function:
is marked.
Change
Press (see display). â
or
ã
Select the required function.
See section “ Available functions ” on page 96.
Select
Press (see display).
The following prerequisites apply:
Short-cut
- Assign the short cut.
SMS
- When SMS address is shown you can leave it blank, or you
can predefine a destination address. You can also predefine the
SMS text.
Change modes
- Mark the mode that should be changed to.
Not used - Not used will be indicated in the Soft key list.
Save or Select Press to save the setting (see display).
The key is programmed and the name of the selected function is
shown.
Repeat the procedure to program a new key or edit a
programmed key.