AASTRA DT4x2 for BusinessPhone User Guide EN - Manual (Page 12)

Description
BusinessPhone – Cordless DT412/DT422/DT432 12
Display info
The display gives you visual feedback on all actions that you
perform, and also textual warnings. In idle mode the upper row is
used for icons and the clock. The next three rows are information
rows (20 possible characters in each row), showing system
information, names and numbers that you edit or dial, your owner
ID etc. The third information row is used for showing the status of
the Cordless (current mode). Examples of status information are;
Muted
,
In charger
etc. When there is no status to show the row is
empty.
Note: It is possible to change the owner ID and the text size
in the display, see section “ Settings ” on page 94.
The lower row displays is the Soft key field. In idle mode it shows
the user defined names of the three Soft keys beneath the display.
In menu mode where the Soft keys are used for different choices, it
gives you the function of each Soft key. Examples of functions are;
Back
,
Options
,
Save
etc. How to define the Soft keys in idle mode,
see section “ Hot keys and Soft keys ” on page 95.
The display
System connection messages
System A System indication
The Cordless is in contact with
System A
. It is also possible for the
system to be named something else, e.g.
BusinessPhone
.
No system
Out of coverage
The Cordless is not in contact with any system. Please ask your
system administrator to log on the Cordless.
Note: When re-entering the coverage area it can take a
couple of minutes before the Cordless automatically has
registered into the system.
It is also possible to get an out of coverage warning signal,
contact your system administrator if you require this.
System A
M.Smith
4736
13:05
Info Doctor Jobs
5 3