Recue, Next, Skip – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 132: Loop

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
119
This button is greyed and not active if the play-list is has ON
AIR selected.
RECUE
OR
When the operator presses the Recue button, the system
preloads the play-list on the first frame of the first element.
This button is greyed and not active if the play-list is on-air.
NEXT
OR
When the play-list is in PLAY when the operator clicks on the
NEXT button, the next element is loaded immediately and played
accordingly to its start mode and start effect.
When the play-list is in PAUSE, and the operator clicks on the
NEXT button, the play-list jumps to the IN of the next element of
the play-list but remains paused.
SKIP
OR
When playing a play-list, if the SKIP button is clicked, the next
element is skipped. If the button is pressed twice, the next 2
elements will be skipped, and so on as defined by the highlight
on the list moving to the next element each time.
LOOP
Changes to
OR
When the operator clicks on the LOOP button, the play-list will
loop when it reaches its end.
To deselect LOOP click on the LOOP button again