6 play-list functions, Recue, Times until transition – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 80: Next, Play-list functions, Unctions

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
67
4.11.6 P
LAY
-L
IST
F
UNCTIONS
Besides the usual transport functions that can be used for the
play-list and are available in the Clip Transport Functions area,
several functions specific to the play-list are available in the
upper part of the Clip-List tab.
RECUE
OR
When the operator presses the Recue button, the system loads
the play-list on the first frame of the first element.
This button is greyed and not active if the play-list is on-air.
T
IMES
U
NTIL
T
RANSITION
The Times Until Transition field specifies the remaining playing
time until the end of the current element of the play-list.
NEXT
OR
When the play-list is in PLAY when the operator clicks on the
NEXT button, the next element is loaded immediately and played
accordingly to its start mode and start effect.
When the play-list is in PAUSE, and the operator clicks on the
NEXT button, the play-list jumps to the IN of the next element of
the play-list but remains paused.