Vtr control panel, 1 introduction, 1 purpose – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 23: 2 overview of the display modes, Introduction, Purpose, Overview of the display modes
Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
10
3. VTR Control Panel
3.1 INTRODUCTION
3.1.1 P
URPOSE
The purpose of the VTR Control Panel is to control a VTR (Video
Tape Recorder) from IP Director. It is an advanced remote
control, from within the IP Director application.
Apart from playback and record control, it also allows the
extraction of clips from a tape to the XT servers. This process
can be done with an individual “auto-edit” or multiples can be
“batch digitized”.
3.1.2 O
VERVIEW OF THE
D
ISPLAY
M
ODES
The VTR Control Panel has 3 display modes:
• transport mode
• auto-edit mode
• batch list mode
The display modes are controlled by the buttons in the top right
corner of the initial VTR Control Panel window.
Button status
Display mode
Transport mode
Auto-edit mode
Batch list mode
To select a display mode: click the corresponding block (top left
/ top right / bottom).