EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 69)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
56
4.8 CLIP INFORMATION TAB
The Clip Information tab makes it possible to view and modify
the information related to the clip. It is active when a clip is
loaded on the channel controlled by the Control Panel. In case a
train or a play-list is loaded, the fields on the Clip Information
tab are greyed-out.
You can enter the clip information in the Save Clip window when
saving a new clip. You can modify this information later on in the
Clip Information tab.
The screenshot below shows the Clip Information tab:
You will find below a description of the various functions
available on the Clip Information tab:
Note
For the changes in the clip information to be saved, you
need to click the Update Clip button. If you do not
update the clip, you will be asked whether you want to
apply the changes to the clip when you will load
another media.