EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 57)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
44
Note
By right-clicking on the E/E button a contextual menu
will show the available record trains. Selecting a train
will go to that train at its current position. A train which
is being played through the network to this output
channel will be approximately 3 seconds behind current
network timecode.
The text below the E/E button indicates the record train which
the channel will return to when the E/E button is pressed.
4.5.13 D
IRECT
A
CCESS
B
UTTONS TO THE
T
RAINS ON
THE
S
HUTTLE
PRO
There are also direct access buttons on the ShuttlePRO
controller to select trains on a channel:
PREVIOUS TRAIN: Selects the previously selected Record train,
pressing twice moves back another selection, etc…
NEXT TRAIN: Selects the next Record train, if on the ‘cam A’
train it will move to ‘cam B’, etc…
SELECT TRAIN: Calls up on the screen a list of channels
available. By moving the jog dial you can move through the list
to highlight the required train and press Select Train again to
select it and exit the menu.