5 mark out, 6 clear in, 7 clear out – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 61: 8 update clip icon, Mark out, Clear in, Clear out, Update clip icon, Lear, Pdate
Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
48
4.6.5 M
ARK
OUT
OR
OR
When pressing the icon, you set an OUT point at the timecode
shown on the jog bar of the Control Panel. The timecode of the
OUT point is then displayed in the Short OUT field.
4.6.6 C
LEAR
IN
OR
If you select the cross next to the Mark IN icon, the following
happens:
• The IN point will be cleared and the Short IN field reset if an
IN point was marked on a live record chain.
• The timecode for the maximum clip IN point including
guardbands is displayed in the Limit IN field if an IN point
was marked on a clip.
4.6.7 C
LEAR
OUT
OR
If you select the cross next to the Mark OUT icon, the following
happens:
• The OUT point will be cleared and the Short OUT field reset
if an OUT point was marked on a live record chain.
• The timecode for the maximum clip OUT value including
guardbands is displayed if an OUT point was marked on a
clip.
4.6.8 U
PDATE
C
LIP
I
CON
OR
If a clip that is loaded to a channel has had a change made to