Default pre-roll duration, Display warning messages, Display 3rd time information in the on-air panel – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 183

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
170
D
EFAULT
P
RE
-R
OLL
D
URATION
When a transition is previewed in a play-list, this setting will
determine the default value for a pre-roll before the transition,
the value can be changed by highlighting the figures and
entering a new value. The Pre-roll value can also be changed
from the Play-List Editor window by using a right-click on
preview icon and selecting a value, this will not change the
default for all play-list tabs as changing the default value here
will.
D
ISPLAY
W
ARNING
M
ESSAGES
Enables or Disables the display of warning messages.
D
ISPLAY
3
RD TIME INFORMATION IN THE ON
-
AIR
P
ANEL
This enables or disables a 3
r d
time information area on the
panel, and what it contains.
If the parameter “Display time till the end of the current element”
is selected in the play-list settings, the following controls are
displayed.