Status bar, 4 vtr control panel mode 2: auto-edit mode, 1 purpose – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 29: 2 screen elements and functions, Vtr control panel mode 2: auto-edit mode, Purpose, Screen elements and functions, Urpose, Creen elements and functions
Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
16
Note
Some VTR devices may not support all the custom
speed values. When a custom speed is not available on
the VTR, the closest available speed will be used.
S
TATUS BAR
The status bar shows the current status of the VTR Control
Panel.
3.4 VTR CONTROL PANEL MODE 2:
AUTO-EDIT MODE
3.4.1 P
URPOSE
In Auto-edit Mode
, a single clip can be digitized from the
VTR to a record channel on an XT server. In the auto-edit
process, clips can be sent to different destinations and published
to user groups.
3.4.2 S
CREEN ELEMENTS AND FUNCTIONS
The Transport Mode buttons and controls remain the same in
Auto-Edit Mode. Refer to section 3.3 “VTR Control Panel Mode
1: Transport Mode”, on page 13 for details.
The extra fields and buttons for Auto-Edit Mode are explained
below.