Resetting playout parameters to default, Inserting a freeze effect in a playlist element, Using macro command to define still/start mode – EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual User Manual

Page 104: Introduction, How to insert a freeze in a playlist element

Advertising
background image

If the playlist is loaded on the channel, the element will start playing at the time defined,
using the parameters defined for the element. See section "Jump on Time
Characteristics" on page 89
for special cases of use.

Using Macro Command to Define Still/Start Mode

Still/Start mode can also be defined by using a macro command, previously configured to
correspond to a specific effect with specific parameters. See section "Applying a Macro
Command to Trigger Playout Effects" on page 106
for information on using macro
commands, and section "Playlist Macro Commands Settings" on page 138 for information
on configuring macro commands.

1.6.5.

Resetting Playout Parameters to Default

It is possible to reset the following playout parameters to the default values specified in
the Tools > Settings > Playlist > Playlist / Default Transition category:

speed,

still mode, start mode,

A/V effect

for all the selected elements. For more information on the values defined as default
values, See section "Default Transition Settings" on page 134.

Resetting parameters to default can be done in two ways:

Selecting Reset transition to default option from the Playlist Element contextual
menu.

Using a macro command, previously configured to correspond to the option. See
section "Applying a Macro Command to Trigger Playout Effects" on page 106
for
information on using macro commands, and section "Playlist Macro Commands
Settings" on page 138
for information on configuring macro commands.

1.6.6.

Inserting a Freeze Effect in a Playlist Element

Introduction

You can insert a Freeze effect in a playlist element, at a certain time code. The frame on
which the Freeze is inserted will become a still image for the specified duration.

How to Insert a Freeze in a Playlist Element

To insert a freeze in a Playlist element, proceed as follows:

1. Browse the playlist element to the image that you want to freeze.

2. Right-click the playlist element and select Insert Freeze:

The Freeze window opens.

94

1. Playlist Panel

EVS Broadcast Equipment S.A. - November 2012

Issue 6.00.B

Advertising