EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 176)

2.3.3. Fill and Key Playlists Editing
Adding Elements in a Fill or Key Playlist
How to Insert a Playlist in a Fill or Key Playlist
Inserting a playlist into a Fill (or Key) playlist can be done in the same way as for inserting
a playlist into a Normal playlist.
However, the system will behave differently depending on the type of the two playlists.
The table below summarizes the actions resulting from the insertion of a playlist (PL1) into
another playlist (PL2):
Playlist 1
(PL1)
Playlist 2 (PL2)
Fill Key
Normal 1. Normal PL1 inserted in Fill PL2
as a group.
2. Black or white elements of exact
same duration inserted in
corresponding Key PL.
Error message: you can only insert
a Key PL into another Key PL.
Fill 1. Fill PL1 inserted in Fill PL2 as a
group.
2. Key PL corresponding to PL1
inserted as a group in Key PL
corresponding to PL2.
Error message: you cannot insert a
Fill PL into a Key PL and vice-versa.
Key Error message: you cannot insert a
Fill PL into a Key PL and vice-versa. 1. Key PL1 inserted in Key PL2 as
a group.
2. Fill PL corresponding to PL1
inserted as a group in Fill PL
corresponding to PL2.
Adding Elements in a Fill or a Key Playlist
Adding an element by drag-and-drop operation into a Fill (or Key) playlist can be done in
the same way as for adding a Normal element into a Normal playlist. See section "How to
Insert an Element by a Drag-and-Drop Operation into the Playlist Grid" on page 62.
However, the system will behave differently depending on the type of the element added
and the type of the playlist. The table below summarizes the actions resulting from the
insertion of an element into a playlist:
166 2. Fill and Key
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B